Stage 2 | 2016-2019 BMW M140i F20

+41kW

/ +99Nm

Performance Package

Stage 2 | 2016-2019 BMW M140i F20

Unlock greater power and efficiency in your 2016–2019 BMW M140i F20/F21 B58 with our Stage Two Package, featuring a high-flow downpipe and upgraded high-pressure fuel pump.
Designed to support increased boost and fueling demands, this package enhances throttle response, mid-range torque, and top-end power. Paired with our custom ECU calibration, you’ll experience sharper performance, faster acceleration, and a more exhilarating drive

Power

+41kW

0%
224kW
224 kW

18% increase

Torque

+99Nm

0%
429Nm
429 Nm

23% increase

We report genuine dyno-tested wheel power. Calculated Flywheel estimates can be 15–30% higher.

Parts Included

Also Included

Expert Installation in Sunshine, Melbourne

Dyno Tuning with Before & After Graphs

Installation & Tuning completed in 2 Days

$3,505

Compare Stages For This Series

Dyno Results For This Series

Performance Parts Included In This Package

Unlock even greater performance in your 2016–2019 BMW M140i F20/F21 B58 with our Stage 2 Package, engineered for serious power and reliability gains.
This upgrade includes a high-flow stainless steel downpipe to reduce backpressure and enhance turbo response, and an upgraded high-pressure fuel pump (HPFP) to support increased fueling demands. Paired with a custom ECU tune precisely calibrated for the B58 platform, this package delivers significant gains in horsepower, torque, throttle response, and overall engine efficiency.

Expect faster spool, improved midrange power, and a more aggressive exhaust note—while retaining daily drivability and long-term reliability.
Perfect for enthusiasts looking to take their M140i to true Stage 2 performance levels.

NGK 94201 Laser Iridium Spark Plug – SILZKGR8B8S

NGK SILZKGR8B8S Laser Iridium Spark Plug – 2 Steps Colder for High-Performance BMW Engines

Maximize ignition reliability and power delivery in your tuned BMW with NGK’s SILZKGR8B8S Laser Iridium spark plugs. Designed with a two-step colder heat range than factory plugs, they are ideal for modified engines operating under elevated cylinder pressures, higher boost levels, and advanced fuel setups such as E85 or water/methanol injection.

These plugs deliver precise ignition, improved knock resistance, and consistent performance in high-load conditions—making them a trusted choice for enthusiasts and professional tuners alike.

Key Features:

Two steps colder than factory BMW spark plugs

Fine-wire iridium center and platinum ground electrodes for exceptional durability and spark accuracy

Supports high-performance builds with increased boost, E85, upgraded turbos, or methanol injection

Recommended gap: 0.022–0.023″ for tuned applications

Reliable cold start performance and extended service life

Compatible with a wide range of BMW turbocharged petrol engines

Whether you’re pushing for more power on the street or the track, these NGK Laser Iridium spark plugs are built to keep your engine firing at its best.

B58 HPFP

A direct OEM replacement engineered for BMW B46D and B58TU engines, offering high-performance fuel delivery, enhanced flow and pressure stability, and plug-and-play installation, making it an ideal upgrade for both stock and tuned setups.

CTS Turbo 4.5″ Race Downpipe for BMW B58 1/2/3/4/5/7 Series RWD & XDRIVE – All Generations

The CTS Turbo 4.5″ Catless Downpipe (CTS-EXH-DP-0024) is a high-performance T304 stainless steel upgrade for BMW B58 engines, designed to improve exhaust flow, increase power, and deliver an aggressive sound, best paired with a Stage 2 tune for optimal results and intended for off-road use only.

Why Choose Our Performance Packages?

Our performance packages include expert installation, premium parts, and professional tuning to ensure exceptional reliability and proven results. With comprehensive support and attention to detail, we optimise every upgrade for maximum performance.

Professional Installation

Our skilled technicians install every component with care, ensuring reliable performance and a perfect fit for your vehicle.

Custom Dyno Tuning

Your vehicle is fine-tuned by expert tuners, highly recommended by leading ECU and performance parts suppliers worldwide.

Before & After Dyno Reports

We provide before and after dyno graphs to showcase measurable power and torque improvements.

Filters

Select Your Make
Select
Select Your Make
Brand
Select
Brand
Sale
Sale
Product Categories
Product Categories
Message Us

Feel free to send us a message and we will reply back to you via email or give you a call to answer all your questions.

Terms & Conditions

Whereas, Tuned By Anton has developed software calibrations and relative engine control management modifications & desires to grant the customer the right to use for race purposes only. Whereas, Customer wishes to use the above specified under the conditions of this limited warranty. Now therefore, in consideration of the mutual promises set forth, the parties agree as follows:

Limited Warranty

The limited workmanship warranty is made and effective as dated on the invoice. Between the customer and Tuned By Anton, a corporation organized and existing under the laws of the local state or territory of Australia.

Tuned By Anton warrants that:

(a) its software calibrations will perform to an industry standard to the best of efforts for a period of 30 days from the date of invoice.

(b) that the medium on which the software calibration is contained will be free from defects workmanship under race use for a 30 day period. Tuned By Anton is not held responsible for any kind of engine failure. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 30 days from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to customer.

(c) Tuned By Anton is not by any means responsible for any faults from third party products. You may be entitled to have the product repaired or replaced under the terms of a voluntary manufacturer’s warranty. This limited warranty is void if failure of the software calibration has resulted from accident, abuse, obsolescence and defects not related to software (e.g. mechanical defects) and misapplication. Any replacement software calibration will be warranted for the remainder of the original warranty period or thirty days.

No other warranties

To the maximum extent permitted by applicable law, Tuned By Anton and its suppliers disclaim all other warranties, either express or implied, including, but not limited to implied warranties of merchant ability and fitness for a particular purpose, with regard to the software and any related written materials. This limited warranty gives customer specific legal rights customers may have other rights depending on jurisdiction.

No liability for damages

To the maximum extent permitted by applicable law, in no event shall Tuned By Anton or its suppliers be liable for any damages whatso ever (including without limitation, special, incidental, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss of business information, or any other pecuniary loss, including damages to vehicle mechanical components and accidental damage to the vehicle) arising out of the use of or inability to use this product, even if Tuned By Anton has been advised of the possibility of such damages in any case, Tuned By Anton and its suppliers entire liability under an provision of this agreement shall be limited to the amount actually paid by you for the software calibration. Because some jurisdiction does not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitations may not apply to you.

Out of warranty cases

Tuned By Anton has the right to check if your warranty valid. If warranty period has lapsed or if any of the exclusions apply, your request will be deemed out of warranty. If your service request is out of warranty, a service charge list with an offer for repair will be provided to you, which you may accept or reject. If you accept the repair we will provide you with an invoice for the repair labor, spare parts and other costs stated in the service charge list. You may pay the invoice within 5 business days of the invoices date of issue. The repair will only be completed after the invoice is settled.

Storage

The customer is required to collect their vehicle within 5 business days from completion. Exceeding this period there will be a vehicle storage balance carried forward.

Tech Support

Remote assistance is only available to support current operating systems e.g. windows 10, where remote assistance required; broadband or greater speed internet connectivity will be required. Note: You are responsible for data and time usage on your internet connection during the course of remote assistance. Where a customer is unable or unwilling to follow or understand instructions on the telephone, or where a customer is not being able to comprehend what is being asked of them, the customer will be referred back to workshop to for further assistance.

Third party Service Provider

Some technical support may require that Tuned By Anton access your computer. If Tuned By Anton or a third-party service provider is required in the course of providing all assistance to you, Tuned By Anton or a third-party service provider will not be responsible or liable under any circumstances what so ever for any losses.

Futile Service

A futile service is a term used when progress work on vehicle has been commenced although unsatisfactory due to (but not limited to) for the following reasons of:

(a) vehicle was not prepared for software calibration

(b) the vehicle cannot be accessed

(c) the vehicle contains of mechanical defects or imperfections in which and therefore cannot continue safely.

(d) the vehicle does not meet the industry standard in relation to mechanical modifications

(e) the vehicle does not have operational safety functions and there is a risk of personnel health and safety.

A futile service fee will be applied to a customer in circumstances where Tuned By Anton cannot complete a
service due to such inconveniences.

All calibrations remain the intellectual property of Tuned by Anton and appropriate measures of protection are mandatory.

It is factual that all performance enhancements introduce additional stress to many components of any vehicle therefore the vehicle owner must accept that it is most likely for failures to occur with any process or procedure to optimise for engine performance. Tuned by Anton therefore ADVISES not to proceed in the event you do not wish to encounter to instigate vehicle failures

In witness where of, the parties have executed this agreement on the dates set forth first above, with full knowledge of its content and significance and intending to be legally bound the by the terms hereof.

DYNO TESTING IS PURELY AT OWNERS RISK